Life Cycle Assessment of landfill biogas management: Sensitivity to diffuse and combustion air emissions

Goal and scopeThe life cycle inventory of landfill emissions is a key point in Life Cycle Assessment (LCA) of waste management options and is highly subject to discussion. Result sensitivity to data inventory is accounted for through the implementation of scenarios that help examine how waste landfilling should be modeled in LCA.MethodFour landfill biogas management options are environmentally evaluated in a Life Cycle Assessment perspective: (1) no biogas management (open dump), conventional landfill with (2) flaring, (3) combined heat and power (CHP) production in an internal combustion engine and (4) biogas upgrading for use as a fuel in buses. Average, maximum and minimum literature values are considered both for combustion emission factors in flares and engines and for trace pollutant concentrations in biogas.ResultsBiogas upgrading for use as a fuel in buses appears as the most relevant option with respect to most non-toxic impact categories and ecotoxicity, when considering average values for trace gas concentrations and combustion emission factors. Biogas combustion in an engine for CHP production shows the best performances in terms of climate change, but generates significantly higher photochemical oxidant formation and marine eutrophication impact potentials than flaring or biogas upgrading for use as a fuel in buses.Interpretation and discussionHowever the calculated environmental impact potentials of landfill biogas management options depend largely on the trace gas concentrations implemented in the model. The use of average or extreme values reported in the literature significantly modifies the impact potential of a given scenario (up to two orders of magnitude for open dumps with respect to human toxicity). This should be taken into account when comparing landfilling with other waste management options. Also, the actual performances of a landfill top cover (in terms of oxidation rates) and combustion technology (in terms of emission factors) appear as key parameters affecting the ranking of biogas management options.     

Assessment of potential health risk for inhabitants living near a former lead smelter. Part 2: site-specific human health risk assessment of Cd and Pb contamination in kitchen gardens

Metal contamination of urban soils and homegrown products has caused major concern. In Part 1, we investigated the long-term effects of a former smelter on the degree of kitchen garden-soil contamination and the quality of the homegrown vegetables from these gardens. The results showed that the soils retained a high level of contamination and that a large proportion of the vegetables produced did not comply with the legislation on the levels of metals allowed for human consumption. The present study aims to assess the associated potential health risk to local inhabitants through consumption of homegrown vegetables and ingestion of soil particles using a land use-based approach. For lead (Pb), the standard hazard quotient (HQ)-based risk assessment method was used to determine the HQ. For cadmium (Cd), the approach consisted of calculating the HQs and then deriving site-specific assessment criteria (SSAC) using the SNIFFER method. The results suggested that the exposure pathways considered should not engender any form of deleterious health effects for adults. For children, Pb was the main concern and induced a relatively high health risk through soil particle ingestion, and most total soil Cd concentrations exceeded the derived SSAC, in particular, through consumption of vegetables. The metal bioaccessibility in soils was incorporated into the methods to establish more realistic risk assessment measures. This study proposes an approach to integrate different human health risk assessment methods. Further investigations should complete the assessment to improve risk determination, e.g., the determination of metal bioaccessibility in vegetables.     

Applying physicochemical approaches to control phosphogypsum heavy metal releases in aquatic environment

One of the most important sources of solid waste in the Mediterranean Basin ecosystem originated from the phosphate fertilizer industries, which discharge phosphogypsum (PG) directly into aquatic environments or are stacked on stockpiles. The present study investigates metal release from PG under the influence of variable pH, increasing PG mass content, and complexing organic matter ligands. Major ions from PG leachates, grain size and charge, main functional groups along with metal leachability (Pb, Cd, Cr, Cu, and Zn) were determined using ion chromatography, laser diffraction, zetameter, Fourier transform infrared spectroscopy, and atomic absorption spectroscopy, respectively. The complete dissolution of PG recorded is at 2 g/L. Saturation and supersaturation with respect to PG may occur at concentrations of 3 and 4 g/L, respectively, revealing a clustering phenomenon leading to heavy metal encapsulation within the aggregates. Organic ligands such as citrate may trigger the cationic exchange within the PG suspension leading to ion release. As these factors are considered as specific process involving the release of contaminants from PG during storage under natural conditions, this study could set the foundations for PG remediation in aquatic environment. Organic ligands under controlled pH conditions could be utilized in treating fertilizer industrial wastes by taking into consideration the particularity of the receiving area, thus decreasing metal hazardous impact on natural media.     

Comparisons of dental morphology in river stingrays (Chondrichthyes: Potamotrygonidae) with new fossils from the middle Eocene of Peruvian Amazonia rekindle debate on their evolution

Endemic South American river stingrays (Potamotrygonidae), which include the most diversified living freshwater chondrichthyans, were conspicuously absent from pre-Neogene deposits in South America despite the fact that recent phylogenetic analyses strongly suggest an older origination for this clade. To date, the rare representatives of this family were mostly represented by ambiguous isolated remains. Here, we report 67 isolated fossil teeth of a new obligate freshwater dasyatoid (Potamotrygon ucayalensis nov. sp) from the fossiliferous level CTA-27 (Yahuarango Formation), near Contamana, in the Peruvian Amazonia. We assigned this sample to a new representative of Potamotrygon by comparison with numerous fresh jaws of living specimens of Potamotrygonidae, thus providing the first detailed review of dental morphology for this poorly understood clade. These new fossils fill a long stratigraphic gap by extending the family range down to the middle Eocene (～41 Mya). Moreover, the relative modernity and diversity in tooth morphology among Eocene freshwater stingrays (including Potamotrygon ucayalensis nov. sp. and coeval North American dasyatoids) indicate that the hypothetically marine ancestor of potamotrygonids probably invaded the rivers earlier than in the middle Eocene. The first potamotrygonids and affiliates were possibly more generalized and less endemic than now, which is consistent with an opportunistic filling of vacated ecospace.     

Study on the pyrolysis of polyethylene in the presence of iron and copper chlorides

Pyrolysis experiments were conducted to elucidate the effects of metal chlorides on the thermal degradation of low-density polyethylene on a continuous pyrolysis temperature range of 600 degrees C to 1100 degrees C. The present work focusses on the ratio of aromatics generated on increasing the pyrolysis temperature in the presence of metal salts, iron(II), iron(III) and copper(II) chlorides. It was observed that beside alpha,omega-dienes, alpha-olefins and n-alkanes which are usually observed during the thermal decomposition of polyethylene, the level of aromatics noticeably increases with the addition of metal salts. At high temperatures, the formation of these aromatics took place in such a way that they become the major products when polyethylene is pyrolyzed in presence of FeCl(3) and CuCl(2). Quantification of the effect of metal salts has been tempted comparing the variation of the ratio of aromatics with pyrolysis temperatures. Mechanisms responsible for the formation of these aromatics in presence of metal salts have been tentatively investigated. They are proposed to result from cyclization/dehydrogenation reactions similar to those observed during the thermal decomposition of polyethylene, but with an increased efficiency due to the metal salts.     

Learning to recognize novel predators under weakly acidic conditions: the effects of reduced pH on acquired predator recognition by juvenile rainbow trout

Summary. Recent studies have demonstrated that under weakly acidic conditions (pH 6.0), many prey fishes, including juvenile rainbow trout (Onchorhynchus mykiss), do not exhibit overt antipredator responses to conspecific chemical alarm cues. In laboratory trials, we investigated the potential effects of reduced pH on the ability of hatchery reared, predator naïve juvenile rainbow trout to acquire the recognition of a novel predator (yellow perch, Perca flavenscens). Initially, we exposed trout to the odour of a predatory yellow perch, buffered to pH 6.0 (weakly acidic) or pH 7.0 (neutral) paired with conspecific skin extracts (also buffered to pH 6.0 or 7.0) or a distilled water control. Juvenile trout exhibited significant increase in antipredator behaviour when exposed to neutral skin extract (pH 7.0). When retested 48 hours later to perch odour alone (pH 7.0), only trout initially conditioned with neutral skin extracts (pairs with either neutral or acidic perch odour) exhibited a learned recognition of perch odour as a predator risk. Those initially exposed to weakly acidic skin extract or the distilled water control did not show a learned response to predator odour. These results demonstrate that the ability to acquire the recognition of novel predators is impaired under weakly acidic conditions, as would occur in natural waterways affected by acidic precipitation.     

Hydraulic characteristics of an anaerobic baffled reactor as onsite wastewater treatment system

The feasibility of using anaerobic baffled reactor(ABR)as onsite wastewater treatment system was discussed.The ABR consisted of one sedimentation chamber and three up-flow chambers in series was experimented under different peak flow factors(PFF of 1 to 6),superficial gas velocities(between 0.6 and 3.1 cm/hr)and hydraulic retention times(HRT)(24,36 and 48 hr).Residence time distribution(RTD)analyses were carried out to investigate the hydraulic characteristics of the ABR.It was found that the PFF resulted in hydraulic dead space.The dead space did not exceed 13% at PFF of 1,2 and 4 while there was 2-fold increase(26%)at PFF of 6.Superficial gas velocities did not result in more(biological)dead space.The mixing pattern of ABR tended to be a completelymixed reactor when PFF increased.Superficial gas velocities did not affect mixing pattern.The effects of PFF on mixing pattern could be minimized by higher HRT(48 hr).The tank-in-series(TIS)model(N=4)was suitable to describe the hydraulic behaviour of the studied system.The HRT of 48 hr was able to maintain the mixing pattern under different flow patterns,introducing satisfactory hydraulic efficiency.Chemical oxygen demand(COD)and total suspended solids(TSS)removals under all flow patterns were achieved more than 85% and 90%,respectively.The standard deviation of effluent COD and TSS concentration did not exceed 15 mg/L.     

Permanganate oxidation of polycyclic aromatic compounds (PAHs and polar PACs): column experiments with DNAPL at residual saturation

Environmental Science and Pollution Research - Permanganate is an oxidant usually applied for in situ soil remediation due to its persistence underground. It has already shown great efficiency for...     

Sources of hydrocarbons in sediments of the Mandovi estuary and the Marmugoa harbour, west coast of India

Surface sediments were collected from various locations of the Mandovi estuary and the Marmugoa harbour. Sediments were analysed for organic carbon (OC), total lipids, n-alkanes concentration and composition. Concentrations of OC, total lipids and n-alkanes varied spatially and ranged from 1 to 2.5%, 176 to 1413 microg/g dry weight (dw) sediments, and 0.8 to 3.2 microg/g dw sediments of the Mandovi estuary, respectively; and from 0.6 to 2.9%, 233 to 1448 microg/g dw sediments, and 1.6 to 10.7 microg/g dw sediments in the Marmugoa harbour, respectively. Long chain, odd carbon n-alkanes (C(23)-C(33)) in the Mandovi estuary, whereas short chain, even carbon n-alkanes (C(11)-C(21)) in the Marmugoa harbour sediments were more abundant. The total HC concentrations, n-alkane composition, CPI, UCM and other evaluation indices suggest the dominance of terrestrial hydrocarbons in the estuarine while petroleum derived hydrocarbons in the harbour sediments. This conclusion was further supported by the abundance of hopanes with C(29) to C(34) alpha, beta compounds and steranes with C(27), C(28) and C(29) compounds in the harbour sediments.